Innov-is XE2
Usein kysytyt kysymykset ja vianmääritys
The App shows the message "Connection to the machine failed. Please reestablish the connection between the device and the machine."
This message is displayed when the WLAN connection to the machine could not be established due to poor WLAN condition.
Check if the wireless connection from the smart device to the machine is working properly.
Make sure that the wireless connection function is enabled on the machine.
Check the following FAQ and Manuals to enable the wireless connection.
⇒ How to set up the wireless network connection with the wizard on the machine
⇒ Go to the Manuals section
Make sure the smart device's Wifi connection is enabled. And make sure if it connect with same network as machine.
If the wireless connection is disconnected, connect again.
The wireless connection condition is poor.
Bring the connected device and machine closer to the access point installation location.
Try the communication in a place where there are few obstacles between the access point, the device and the machine.
Jos kysymykseesi ei vastattu, oletko tarkistanut muut usein kysytyt kysymykset?
Oletko tarkistanut käyttöohjeet?
Jos tarvitset lisäapua, ota yhteys Brotherin asiakaspalveluun:
Sisältöpalaute
Auta meitä parantamaan tukea antamalla palautetta alla.
Valmistelu Kirjonta Käyttö Tarvikkeet Huolto One Point -ohjeet Yleistä tietoa Muut Verkkoasetukset My Connection Kirjonta Valmistelu Käyttö Ohjelmisto Virheilmoitukset Verkkoasetukset Opetusvideot My Connection My Stitch Monitor My Design Snap Artspira
Johdanto / Ohjeet
Johdanto / Ohjeet (Videot usein kysytyistä kysymyksistä) My Connection -asetukset
Virheilmoitukset Yleinen kysymys Vianetsintä
Ylälangan pujotus Puola (puolaus / asettaminen paikoilleen) Neula/lanka/kangas Ennen kirjontaa Käyttöohjeet (UKK-videot) Muut
Kirjontakuviot Neula/lanka Kangas/tukikangas Kirjontakehys Kirjonnan muokkaus Kirjontavinkkejä Käyttöohjeet (UKK-videot)
Muistitoiminto Koneen asetukset Käyttöohjeet (UKK-videot) Muut
Tarvikkeet
Puhdistus Voitelu Huoltoviesti Hoito- ja huolto-ohjeet (UKK-videot) Muut
One Point -ohjeet
Yleistä tietoa
Verkkoasetusvinkkejä
Muut
Kirjonnan aikaiset ongelmat Kirjontatulos Kuvion valinta ja muokkaus Kirjontatiedot
Puola (puolaus / asettaminen paikoilleen)
Koneen asetukset
Layout & Editing Kirjontatiedot
Virheilmoitus koneen näytössä
Langattoman verkon asetukset
Valmistelu (video) Käyttö (video) Kirjonta (video) Huolto ja ylläpito (video)
Yleinen kysymys Opetusvideot Ohjeet Vianetsintä Virheilmoitukset
Yleinen kysymys Opetusvideot Ohjeet Vianetsintä Virheilmoitukset