SDX1250
![Usein kysytyt kysymykset ja vianmääritys Usein kysytyt kysymykset ja vianmääritys](/g/b/shared/img/module/icon_question_33.png) |
Usein kysytyt kysymykset ja vianmääritys |
"The mat cannot be recognized. The mat will unload." message appearing on the LCD. What does it mean?
Possible Causes (or Results)
Case1 : |
The dotted marks on the part of the mat that is inserted are dirty. |
Case2 : |
The dotted marks on the part of the mat that is inserted are hidden by material that was attached. |
Case3 : |
The mat was inserted so that the side with the material attached is facing down. |
Case4 : |
The mat was inserted in the wrong direction. |
Case5 : |
The scanner glass is dirty. |
Case6 : |
A mat designed specifically for this machine is not used. |
Solutions
----- Case1 -----
Clean the dotted marks on the mat and their surrounding area.
![image image](/g/b/img/faqend/faqh00000757_001/eu_ot/en/1889526/faqh690_fig002001.gif)
----- Case2 -----
Attach the material while keeping it within the adhesive area of the mat.
![image image](/g/b/img/faqend/faqh00000757_001/eu_ot/en/1889527/faqh690_fig002002.gif)
----- Case3 -----
Insert the mat so that the side with the material attached is facing up.
----- Case4 -----
Insert the mat in the correct direction.
![image image](/g/b/img/faqend/faqh00000757_001/eu_ot/en/1889528/faqh690_fig002003.gif)
----- Case5 -----
Clean the scanner glass inside the machine.
For details, see Cleaning the scanner glass.
----- Case6 -----
Replace the mat with one designed specifically for this machine.
Jos kysymykseesi ei vastattu, oletko tarkistanut muut usein kysytyt kysymykset?
Oletko tarkistanut käyttöohjeet?
Jos tarvitset lisäapua, ota yhteys Brotherin asiakaspalveluun:
Sisältöpalaute
Auta meitä parantamaan tukea antamalla palautetta alla.