3034D
Usein kysytyt kysymykset ja vianmääritys |
Preparation before threading
Raise the telescoping thread tree to its highest position.
Make sure that the thread holders are in alignment above the spool pins as illustrated below.
-
Turn off the main power and light switch for safety.
-
Raise the presser foot using presser foot lever.
-
Turn the hand wheel so that the mark on the hand wheel <A> is aligned to the line <B> on the machine. (See CHAPTER 1 "Turning direction of hand wheel".)
Sisältöpalaute
Auta meitä parantamaan tukea antamalla palautetta alla.