MFC-L2710DW
 |
Usein kysytyt kysymykset ja vianmääritys |
Send a Fax in Real Time
When sending a fax, the machine scans the document into the memory before sending it. As soon as the telephone line is free, the machine starts dialling and sending. If you want to send an important document immediately without waiting for the machine to retrieve the scan from its memory, turn on [Real Time TX].
- If the memory is full and you are sending a fax from the ADF, the machine sends the document in real time (even if [Real Time TX] is set to [Off]). If the memory is full, faxes from the scanner glass cannot be sent until you clear some of the memory.
- In Real Time Transmission, the automatic redial feature does not work when using the scanner glass.
- If [Real Time TX] is set to on, the option to scan 2-sided documents is not available.
MFC-L2710DN/MFC-L2710DW
- Press
(FAX). - Load your document.
- Press Menu.
- Press
or 
to display the [Fax] option, and then press OK. - Press or to display the [Setup Send] option, and then press OK.
- Press or to display the [Real Time TX] option, and then press OK.
- Press or to display the [On] option, and then press OK.
- When finished, press Stop/Exit.
- Enter the fax number.
- Press Start.
MFC-L2730DW/MFC-L2750DW
- Load your document.
- Press
. - Press [On] or [Off].
- Press [OK].
- Enter the fax number.
- Press [Fax Start].
Sisältöpalaute
Auta meitä parantamaan tukea antamalla palautetta alla.
