HL-4140CN

Usein kysytyt kysymykset ja vianmääritys

Usein kysytyt kysymykset ja vianmääritys

Jam Rear

If a paper jam occurs behind the back cover, follow these steps:

  1. Leave the machine turned on for 10 minutes to cool down.

  2. Open the back cover.

    Image

    After you have just used the machine, some internal parts of the machine will be extremely hot. Wait for the machine to cool down before you touch the internal parts of the machine.

    Image




  3. Pull the green tabs (2) at the left and right hand sides toward you and fold down the fuser cover (1).

    Image

    If the envelope levers (3) inside the back cover are pulled down to the envelope position, lift these levers to the original position before pulling the green tabs (2) down.



  4. Using both hands, gently pull the jammed paper out of the fuser unit.

    Image
  5. Close the fuser cover (1).

    Image

    If you print on envelopes, pull down the envelope levers (2) to the envelope position again before closing the back cover.



  6. Close the back cover.

Aiheeseen liittyvät kysymykset

Jos kysymykseesi ei vastattu, oletko tarkistanut muut usein kysytyt kysymykset?

Oletko tarkistanut käyttöohjeet?

Jos tarvitset lisäapua, ota yhteys Brotherin asiakaspalveluun:

Aiheeseen liittyvät mallit

HL-4140CN, HL-4150CDN, HL-4570CDW, HL-4570CDWT

Sisältöpalaute

Auta meitä parantamaan tukea antamalla palautetta alla.

Vaihe 1: Miten hyödyllinen tällä sivulla oleva tieto on sinulle?

Vaihe 2: Haluaisitko antaa lisäkommentteja?

Huomaathan, että tämä lomake on tarkoitettu ainoastaan palautteen antamiseen.