When any of the following messages appear on the LCD, turn the printer Off, wait 5 seconds and then turn the printer On again. If the alarm continues, perform a Factory Reset as follows:
Press the - (minus) button until the screen says Reset Menu. The LCD should be amber.
Press the Set button.
Press the + (plus) or - (minus) button until the LCD says Factory Reset, press Set.
The LCD will say OK? confirming your selection. Press the Set button.
The printer will automatically go to a green Ready on the LCD.
If this does not clear the problem, consult your dealer or our authorized service representative.
Jos kysymykseesi ei vastattu, oletko tarkistanut muut usein kysytyt kysymykset?
