Reset the print server to the default factory settings.
If you wish to reset the print server back to its default factory settings (resetting all information such as the password and IP address information), please follow the steps below:
Turn off the machine.
Make sure that the front cover is closed and the power cord is plugged in.
Hold down Go as you turn on the power switch. Keep Go pressed down until all the LEDs light up, and then the Ready LED turns off.
Release Go. Make sure that all the LEDs turn off.
Press Go six times. Make sure that all the LEDs light up to indicate the print server has been reset to its factory default settings. The machine will restart.
Jos kysymykseesi ei vastattu, oletko tarkistanut muut usein kysytyt kysymykset?
