DCP-L8410CDW

Usein kysytyt kysymykset ja vianmääritys

Usein kysytyt kysymykset ja vianmääritys

Vertical colored streaks or bands appear on the page

Colored streaks or bands down the page

 

NOTE: Illustrations shown below are from a representative product and may differ from your Brother machine.


Check the following points to resolve the issue:

  1. (For models with Automatic Document Feeder only)
    Wipe the scanner glass strip with a dry lint free soft cloth.
    > Click here to see how to clean the scanner glass strip.
  2. Clean all four corona wires (one for each color) inside the drum unit by sliding the green tab.
    > Click here to see how to clean the corona wires.
     
  3. Make sure the green tab of the corona wire is in the home position (1).
    corona wire
     
  4. Replace the toner cartridge that matches the color of the streak or band.
    To identify the color of the toner cartridge, follow the steps below:

     

    1. > Click here to print the chart. [345KB/ PDF]
    2. Compare your printed document with the printed chart to identify the color causing the issue.
    3. Replace the toner cartridge of the color.
      > Click here to see how to replace the toner cartridge.
  5. Install a new drum unit.
    > Click here to see how to replace the drum unit.

Jos kysymykseesi ei vastattu, oletko tarkistanut muut usein kysytyt kysymykset?

Oletko tarkistanut käyttöohjeet?

Jos tarvitset lisäapua, ota yhteys Brotherin asiakaspalveluun:

Aiheeseen liittyvät mallit

DCP-L8410CDW, MFC-L8690CDW, MFC-L8900CDW, MFC-L9570CDW(T), MFC-L9630CDN, MFC-L9670CDN

Sisältöpalaute

Auta meitä parantamaan tukea antamalla palautetta alla.

Vaihe 1: Miten hyödyllinen tällä sivulla oleva tieto on sinulle?

Vaihe 2: Haluaisitko antaa lisäkommentteja?

Huomaathan, että tämä lomake on tarkoitettu ainoastaan palautteen antamiseen.