MFC-J870DW

FAQs & Troubleshooting

FAQs & Troubleshooting

Adjust the settings of the ring volume, beeper volume and speaker volume on my Brother machine.

Your Brother machine has three adjustable volume settings: Ring Volume, Beeper Volume, and Speaker Volume.


Follow the steps below to change the volumes:


CHANGING RING VOLUME

You can change your Brother machine's Ring Volume by following the steps below:


  1. Press Settings(Settings).

  2. Press All Settings.

  3. Press the Up or Down arrow key to display General Setup.

  4. Press General Setup.

  5. Press the Up or Down arrow key to display Volume.

  6. Press Volume.

  7. Press Ring.

  8. Press Low, Med, High or Off.

  9. Press Home(Home).

CHANGING BEEPER VOLUME


You can set your Brother machine's Beeper Volume to Low, Medium, High, or Off. When the beeper is on, the machine will make a sound when you press the Touchscreen or Touchpanel, make a mistake, or after you send or receive a fax.

Follow the steps below to change your Brother machine's Beeper Volume:

  1. Press Settings(Settings).

  2. Press All Settings.

  3. Press the Up or Down arrow key to display General Setup.

  4. Press General Setup.

  5. Press the Up or Down arrow key to display Volume.

  6. Press Volume.

  7. Press Beep.

  8. Press Low, Med, High or Off.

  9. Press Home(Home).

CHANGING SPEAKER VOLUME


You can change your Brother machine's Speaker Volume by following the steps below:


  1. Press Settings(Settings).

  2. Press All Settings.

  3. Press the Up or Down arrow key to display General Setup.

  4. Press General Setup.

  5. Press the Up or Down arrow key to display Volume.

  6. Press Volume.

  7. Press Speaker.

  8. Press Low, Med, High or Off.

  9. Press Home(Home).


You can also adjust the speaker volume by pressing Hook.


  1. Do one of the following:

    • When Fax Preview is set to off or your Brother machine does not have the function, press Fax(Fax).

    • When Fax Preview is set to on, press Fax(Fax) and Sending Faxes(Sending Faxes).


  2. Press Hook.

  3. Press Home(Home).

  4. Press image or image on the Touchscreen. Each press changes the volume to the next setting.

  5. Press Hook.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

MFC-J2510, MFC-J4510DW, MFC-J4710DW, MFC-J650DW, MFC-J870DW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: €Are there any comments you would like to add?

Please note this form is used for feedback only.