MFC-J870DW

FAQs & Troubleshooting

FAQs & Troubleshooting

Set the date and time.

Follow the steps below to set the date and time:


  1. Press Settings(Settings).

  2. Press All Settings.

  3. Press the Up or Down arrow key to display Initial Setup.

  4. Press Initial Setup.

  5. Press the Up or Down arrow key to display Date & Time.

  6. Press Date & Time.

  7. Press Date.

  8. Enter the last two digits of the year on the Touchscreen, and then press OK.

    image

    (for example, enter 1 3 for 2013.)

  9. Enter the two digits for the month on the Touchscreen, and then press OK.

  10. Enter the two digits for the day on the Touchscreen, and then press OK.

  11. Do one of the following:

    • If the Touchscreen dislays Time, press Time.


      Enter the time on the Touchscreen in 24-hour format.


    • If the Touchscreen displays Clock Type, press Clock Type.


      Press 12h Clock or 24h Clock.

      image

      Press Time.


      Enter the time on the Touchscreen.


      Press AM/PM to cycle AM and PM. (12h Clock only)

      image



  12. Press OK, and then press Home(Home).

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

DCP-J552DW, DCP-J752DW, MFC-J650DW, MFC-J870DW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: €Are there any comments you would like to add?

Please note this form is used for feedback only.