FAQs & Troubleshooting

FAQs & Troubleshooting

How do I create a Banner Label using DK-22205 or similar? (P-touch Editor 5.0 for Mac)

The method of creating a banner label using "White Continuous Length Paper Tape 62mm (DK-22205)" is described below:

  1. Insert the DK roll


    Insert the "White Continuous Length Paper Tape 62mm" into your QL printer. This DK roll is provided as a starter roll with the QL printer. Separate purchase may be necessary when using another QL printer.

  1. Select the Tape Length

    Start P-touch Editor.
    In the Command bar, click Image to display the paper inspector.

    Set the label width to 62 mm (2-3/7"), and set the label length to "Auto".

    Image    Image


    If you don't want the inspector to appear, click Image. If you want it to appear again, click the button again.


  1. Add clip art to the banner

    Click Image and then Image. The Clip Art Gallery dialog box will appear.


    Choose the category you like from the Category pull-down menu and select a piece of clip art, then click "OK".

    The selected clip art will be placed on the label. You can reposition it anywhere.

  1. Enter the text

    Click Image, and then click anywhere on the layout window.

    Type the text.


    Adjust the font, size and style of the text using the text inspector.

    Click  Image  on the Draw/Edit toolbar, and then click on the text object. Small squares called handles will appear around the text. Adjust the position of the text object by dragging it with the mouse.

  1. Print the label

    Click Image to open the print dialog box and click "Print".

    Completed label

    Peel the printed label from backing and apply the label.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

QL-1050, QL-1050N, QL-1060N, QL-500, QL-500A, QL-550, QL-560, QL-570, QL-580N, QL-650TD, QL-700, QL-710W, QL-720NW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: €Are there any comments you would like to add?

Please note this form is used for feedback only.