HL-L9470CDN

FAQs & Troubleshooting

FAQs & Troubleshooting

Vertical colored streaks or bands appear on the page

Colored streaks or bands down the page


NOTE: Illustrations shown below are from a representative product and may differ from your Brother machine.

 

Check the following points to resolve the issue:

  1. Clean all four corona wires (one for each color) inside the drum unit by sliding the green tab.
    > Click here to see how to clean the corona wires.
     
  2. Make sure the green tab of the corona wire is in the home position (1).
    corona wire
     
  3. Replace the toner cartridge that matches the color of the streak or band.
    To identify the color of the toner cartridge, follow the steps below:

     

    1. > Click here to print the chart. [345KB/ PDF]
    2. Compare your printed document with the printed chart to identify the color causing the issue.
    3. Replace the toner cartridge of the color.
      > Click here to see how to replace the toner cartridge.
  4. Install a new drum unit.
    > Click here to see how to replace the drum unit.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

HL-L8260CDW, HL-L8360CDW, HL-L9310CDW(T), HL-L9430CDN, HL-L9470CDN

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.