HL-3150CDW

FAQs & Troubleshooting

FAQs & Troubleshooting
  • Date: 30/10/2012
  • ID: faq00000023_007

Adjust the print position of each color.

Follow the auto registration instruction below.


  1. Press the Up or Down arrow key to choose Color Correction. Press OK.
  2. Press the Up or Down arrow key to choose Auto Regist.. Press OK.
  3. Check Registration is displayed on the LCD. Press OK.
  4. Press the Up arrow key to choose Yes.
    Now the print position of each color is adjusted automatically.

If you want to set the interval time to perform the auto registration, do the following:

  1. Press the Up or Down arrow key to choose Color Correction. Press OK.
  2. Press the Up or Down arrow key to choose Frequency. Press OK.
  3. Press the Up or Down arrow key to choose Normal, Low or Off. 
    Normal is configured as the default setting for the interbal time.
  4. Press OK.

Related FAQs

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

HL-3140CW, HL-3142CW, HL-3150CDW, HL-3152CDW, HL-3170CDW, HL-3172CDW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit