HL-2140

FAQs & Troubleshooting

FAQs & Troubleshooting

Print command (cupswrapper) (Linux)

Print Command :
lpr -P (printer name) [ -o Option] (filename)

You can view the details of Parameter by the following command.
Command: brprintconf_{Model Name without "-"}
E.g. MFC-J430W: brprintconf_mfcj430w

Option Table

Category Option Parameter Example
Paper Size
***The "PageSize=" can be swapped with "media="
PageSize=A4
Paper Type BrMediaType=PLAIN
Paper Source InputSlot=AUTO
Duplex Duplex=Tumble
Resolution Resolution=300dpi
Toner Save Mode TonerSaveMode=On TonerSaveMode=ON
Sleep Sleep=30minutes

 

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

DCP-7010, DCP-7010L, DCP-7010R, DCP-7025, DCP-7025R, DCP-7030, DCP-7030R, DCP-7045N, DCP-7045NR, DCP-7055, DCP-7055R, DCP-7055W, DCP-7055WR, DCP-7057, DCP-7057R, DCP-7057WR, DCP-7060D, DCP-7060DR, DCP-7065DN, DCP-7065DNR, DCP-7070DW, DCP-7070DWR, DCP-8060, DCP-8065DN, DCP-8070D, DCP-8085DN, DCP-8110DN, DCP-8250DN, FAX-2920, FAX-2920R, FAX-2940, HL-1030, HL-1230, HL-1240, HL-1250, HL-1270N, HL-1430, HL-1440, HL-1450, HL-1470N, HL-1650, HL-1670N, HL-1850, HL-1870N, HL-2030, HL-2030R, HL-2040, HL-2040R, HL-2070N, HL-2070NR, HL-2130, HL-2130R, HL-2132, HL-2132R, HL-2140, HL-2140R, HL-2150N, HL-2150NR, HL-2170W, HL-2170WR, HL-2240, HL-2240D, HL-2240DR, HL-2240R, HL-2250DN, HL-2250DNR, HL-2270DW, HL-5030, HL-5040, HL-5050, HL-5070N, HL-5240, HL-5240L, HL-5250DN, HL-5270DN, HL-5280DW, HL-5340D, HL-5350DN, HL-5370DW, HL-5380DN, HL-5440D, HL-5450DN, HL-5450DNT, HL-5470DW, HL-6050, HL-6050D, HL-6050DN, HL-6180DW, HL-6180DWT, MFC-7225N, MFC-7320, MFC-7320R, MFC-7360N, MFC-7360NR, MFC-7420, MFC-7420R, MFC-7440N, MFC-7440NR, MFC-7460DN, MFC-7820N, MFC-7820NR, MFC-7840W, MFC-7840WR, MFC-7860DW, MFC-7860DWR, MFC-8370DN, MFC-8380DN, MFC-8460N, MFC-8510DN, MFC-8520DN, MFC-8860DN, MFC-8870DW, MFC-8880DN, MFC-8890DW, MFC-8950DW, MFC-8950DWT

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.