PE-400D
 |
FAQs & Troubleshooting |
Embroidery
-
Problem that occurs most in embroidery is misalignment of pattern.
This is caused mostly because a fabric is loose when it's set into an embroidery frame.
Make sure to set a fabric tightly into an embroidery frame so that you may hear a drum-like sound if you tap the set fabric lightly.
-
Use a stabilizer material when you sew thin fabrics, stretch fabrics or fabrics which easily pucker.
Prepare a stabilizer material that is larger than an embroidery frame to be used.
Make sure to attach right surface of stabilizer material to a fabric securely by using an iron.
Fusible side of stabilizer
Fabric(wrong side) - Use Brother embroidery threads and needle 75/11 for embroidery.
Related Models
Innov-is 1200, Innov-is 1250, Innov-is 1500D/1500, Innov-is 2200, Innov-is 4000D/4000, Innov-is 5000, Innov-is 500D, Innov-is 700E, Innov-is 700EII, Innov-is 750E, Innov-is 770E, Innov-is 900, Innov-is 90E, Innov-is 950, Innov-is 955, Innov-is 97E, Innov-is BP3600, Innov-is F440E, Innov-is F480, Innov-is F540E, Innov-is F580, Innov-is I, Innov-is Ie, Innov-is M230E, Innov-is M240ED, Innov-is M270, Innov-is M280D, Innov-is M330E, Innov-is M340ED, Innov-is M380D, Innov-is MV VIOLA® EDITION, Innov-is NV2600, Innov-is NV2650D, Innov-is NV2700, Innov-is NV2750D, Innov-is NV800E, Innov-is NV850E, Innov-is NV870SE, Innov-is NV880E, Innov-is V3, Innov-is V3 LE, Innov-is V3 SE, Innov-is V5, Innov-is V5 LE, Innov-is V7, Innov-is XE1, Innov-is XE2, Innov-is XJ1, Innov-is XJ2, Innov-is XP1, Innov-is XP3, Innov-is XV, PE-150V, PE-180D, PE-190D, PE-300S, PE-400D, PE-DESIGN 10, PE-DESIGN 11, PE-DESIGN 8, PE-DESIGN Lite, PE-DESIGN NEXT, PE-DESIGN PLUS, PE-DESIGN PLUS2, PE-DESIGN Ver.5, PE-DESIGN Ver.6, PE-DESIGN Ver.7, PP1, SuperGalaxie 3000/3000C/3000D/3100D
