DCP-T510W

FAQs & Troubleshooting

FAQs & Troubleshooting

Change the Print Setting Options When Having Printing Problems

If your print result is poor quality, select these options depending on your purpose. When these settings are selected, the printing speed is slower.

These options are available only when performing operations from the machine, such as copying. When printing from your computer, change the settings in the printer driver.

DCP-T310/DCP-T510W/DCP-T710W

  1. Press Menu.
  2. Press or to select the following:
    1. Select [Maintenance]. Press OK.
    2. Select [Print Setting]. Press OK.
  3. Press or to select one of the following options:
    Option
    Description
    ReduceSmudging
    Select this option according to whether you are using 1-sided printing if you have problems with smudged printouts or paper jams.
    Slow Drying
    Select this option if you use a type of plain paper on which ink dries slowly.
  4. Press OK.
  5. Press or to select the option you want. Press OK.
  6. Press Stop/Exit.

MFC-T910DW

  1. Press Settings.
  2. Press or to select the following:
    1. Select [General Setup]. Press OK.
    2. Select [Maintenance]. Press OK.
    3. Select [Print Setting Options]. Press OK.
  3. Press or to select one of the following options:
    Option
    Description
    Reduce Smudging
    Select this option according to whether you are using 1-sided or 2-sided printing if you have problems with smudged printouts or paper jams.
    Slow Drying Paper
    Select this option if you use a type of plain paper on which ink dries slowly.
  4. Press OK.
  5. Press or to select the option you want. Press OK.
  6. Press Stop/Exit.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

DCP-T310, DCP-T510W, DCP-T710W, MFC-T910DW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.