Access Web Based Management
- We recommend using the HTTPS security protocol when configuring settings using Web Based Management.
- When you use HTTPS for Web Based Management configuration, your browser will display a warning dialog box. To avoid this warning, you can configure the certificate settings to use a valid security certificate.
The default login password to manage machine settings is either:
the password located on the back or bottom of the machine preceded by "Pwd"
- the password located on the back or bottom of the machine preceded by "Pwd"
- Start your web browser.
Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the machine's IP address).
If the machine prompts you for a password, type it, and then click .
If you have not previously set your own password, type the default login password above.
You can now change your machine settings.
If you change the protocol settings, you must restart the machine after clicking Submit to activate the new configuration.