ADS-2100e

FAQs & Troubleshooting

FAQs & Troubleshooting

Clean the Separation Pad

Please follow the steps below to clean the Separation Pad.

NOTE: Illustrations shown below are from a representative product and may differ from your Brother machine.

  1. Unplug the machine from the AC power outlet (electrical socket).

  2. Open the Top Cover (1) by lifting the bottom edge of the cover and the Front Cover (2) by pulling the Cover Release Lever (3) toward you.

    Open the cover

  3. Press the tab on each side of the Separation Pad cover toward the center of the cover (1) on the inside of the Front Cover and then pull the Separation Pad Cover (2) open.

    Separation Pad Cover

    Be careful when touching the Separation Pad and its surrounding area in the machine. Otherwise, you could cause injury to yourself and serious damage to the machine.

    Do not touch

     

  4. Press the tab on each side of the Separation Pad toward the center of the pad assembly (1) and then pull the Separation Pad upward.


    Pull the Separation Pad

  5. Clean the Separation Pad with a lint-free cloth moistened with water.

  6. Attach the Separation Pad to the Separation Pad Cover.

    Separation Pad

  7. Close the Separation Pad Cover until it clicks.
  8. Close the Front Cover and the Top Cover.
  9. Plug the power cord back into the AC power outlet (electrical socket).

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

ADS-2100, ADS-2100e, ADS-2600W, ADS-2600We

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.