TJ-4420TN
 |
FAQs & Troubleshooting |
Switch between the wired network and Wi-Fi® network/Bluetooth® connection
-
Make sure you update your printer's firmware to ver.B1.17.S24 or later. (See "How to update the firmware")
-
To use Wi-Fi or Bluetooth, the optional WLAN / BT Interface (PA-WB-001) is required.
-
Turn the printer on.
-
Press [Menu] - [Interface] - [Network Interface].
-
Select [Auto], [Wi-Fi/Bluetooth], or [Ethernet].
| Setting |
Connection Mode |
| Auto |
Wi-Fi network/Bluetooth connection (when the WLAN / BT Interface (PA-WB-001) is installed before the printer is turned on)
Wired network connection (when the WLAN / BT Interface (PA-WB-001) is not installed before the printer is turned on) |
| Wi-Fi/Bluetooth |
Wi-Fi network/Bluetooth connection (when the WLAN / BT Interface (PA-WB-001) is installed) |
| Ethernet |
Wired network connection |
When finished, the printer will restart automatically.
You cannot use the wired network and Wi-Fi network/Bluetooth connection simultaneously.
If your question was not answered, have you checked other FAQs?
Have you checked the manuals?
If you need further assistance, please contact Brother customer service:
Related Models
TJ-4420TN, TJ-4520TN, TJ-4522TN
Content Feedback
To help us improve our support, please provide your feedback below.
