PT-P910BT

FAQs & Troubleshooting

FAQs & Troubleshooting
  • Date: 14/07/2020
  • ID: faqp00100522_000

The printer stops printing, the power LED blinks in red, and my mobile device displays an error message.

Make sure that you:
- Do not press the cutter lever while printing.
- Do not pull on the tape while printing.

 

Do the following:

 

  1. If the application you use (such as iPrint&Label or P-touch Design&Print) displays any errors, tap the [OK] button to clear them.
     
  2. If any tape remains in the printer, feed and cut the tape. For more information, see "The printer stops while printing, or the tape is cut in the middle of the text. (P-touch Design&Print / Design&Print 2)".
     
  3. Turn off the printer and then turn it on again.
     
  4. Try to print again.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

PT-P300BT, PT-P710BT, PT-P910BT

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit