TJ-4020TN

FAQs & Troubleshooting

FAQs & Troubleshooting

How to install the Windows driver via Wi-Fi®/ wired network

  • To use Wi-Fi, an optional Wi-Fi Interface (PA-WI-002) is required.
  • Make sure both your wireless access point/router's and your printer's network settings are correctly set up.
    For more information, see the documentation provided with your wireless access point/router, or contact the router manufacturer, your system administrator, or Internet service provider.

Install the optional Wi-Fi Interface PA-WI-002 (for Wi-Fi connection)

 

Follow the steps below to attach the optional Wi-Fi Interface (PA-WI-002) before connecting to Wi-Fi.

The optional Wi-Fi Interface (PA-WI-002) consists of the following items.


PA-WI-002

 

1. PA-WI-002

2. Antenna

3. Spare Screw (× 2)

  1. Remove the cover.
    Remove the cover
  2. Install the PA-WI-002.
    Install the PA-WI-002
  3. Install the antenna.
    Install the antenna

 

Install the Windows driver via Wi-Fi/wired network

 

For details on how to install the driver, refer to the following.

For Wi-Fi connection: See "Wi-Fi® Network Connection (Windows)" in the FAQ: "How to connect the printer to your computer".
For wired network connection: See "Wired Network Connection (Windows)" in the FAQ: "How to connect the printer to your computer".

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

TJ-4005DN, TJ-4020TN, TJ-4021TN, TJ-4021TNR, TJ-4120TN, TJ-4121TN, TJ-4121TNR

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.