TJ-4522TN

FAQs & Troubleshooting

FAQs & Troubleshooting

How to install the Windows driver via Bluetooth®

  1. Check the Bluetooth Local Name:

    Using the BPM
    1. Connect the printer to your computer using a USB cable.
    2. Start the BPM.
    3. Click Printer Configuration > Bluetooth.
      BPM - Bluetooth
    Using the LCD
    Select Interface > Bluetooth.
    LCD - Interface

  2. Turn on the Bluetooth function of your computer.

  3. Click Start > Settings > Devices > Bluetooth & other devices and enable Bluetooth to pair the computer with your printer.
    Bluetooth & other devices

  4. Click Add Bluetooth or other device and select your printer.

  5. Download the latest version of the printer driver from the [Downloads] section of this website.

  6. Run the Seagull Driver Wizard application and select Install printer drivers, and then click Next.
    Seagull Driver Wizard

  7. Select Bluetooth and then click Next.
    Connect Printer

  8. Select the Bluetooth device that you want to pair, and then click OK.
    Select Bluetooth Device

    The model name is located on the back of the printer.


  9. Select your printer and click Next, and then follow the on-screen instructions.
    Specify Printer Model
    Specify Printer Name
    Installing Drivers

  10. After the installation is completed, click Finish.

    If you cannot install the printer driver properly, remove the printer driver or reset the printer settings, and then reinstall the printer driver.
    For more information, see "How to install the Windows driver via Wi-Fi®/ wired network".

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

RJ-2035B, RJ-2055WB, RJ-3035B, RJ-3055WB, TD-4650TNWB, TD-4650TNWBR, TD-4750TNWB, TD-4750TNWBR, TJ-4420TN, TJ-4422TN, TJ-4520TN, TJ-4522TN

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.