PT-D200

FAQs & Troubleshooting

FAQs & Troubleshooting

How do I set tape margins and what features are they?

  1. Press the [Menu] key.

     

  2. Press the Cursor key ( Cursor ) to select [Margin] and press the [Enter] key ( Enter (D200) / Enter (D202) ).

     

  3. Press the Cursor key to select the margin you want among [Full / Half / Narrow / Chain Print].

     

  4. Press the [Enter] key.

     

<Full / Half / Narrow>

For leaving equal margins on both sides of the text

 

The margin length is as follows.

 

 

<Chain Print>

For creating a label containing text in various styles

 

  1. Enter text.
     
  2. Press the [Print] key ( Print (D200) / Print (D202) ), then [Copies:] appears.
     
  3. Press the Cursor key or the number key to select the number of copies.
     
  4. Press the [OK] key. Printing starts and then the message [OK to Feed?] appears.
     
  5. Press the Escape key ( Esc ) to enter more text.
     
  6. Clear the text, enter the text for the next label, and then press the [Print] key.
     
  7. When the message [OK to Feed?] appears after the last label is printed, press the [OK] key.
     
  8. After the tape is fed, press the cutter lever to cut off the chain of labels.
  • When [Chain Print] is set, feed the tape before using the cutter otherwise a part of the text may be cut off. Also, cut along the printed dots (:) with scissors so the text is centered in the label.
     
  • When [Half] or [Narrow] is set, the length from the printed dots (:) to the end of the label is displayed.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

PT-D200

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.