QL-710W

FAQs & Troubleshooting

FAQs & Troubleshooting

How do I reset network setting?


 

  • To reset network setting and turn APIPA ON

     

    1. Press and hold the Cut button while holding down the ON/OFF button when the machine is turned off.
    2. The Wi-Fi lamp starts flashing and the Status lamp lights orange.
    3. Press the Cut button twice while continuing to hold down the ON/OFF button.
    All the network settings will be reset.

 

  • To reset network setting and turn APIPA OFF

     

    1. Press and hold the Cut button while holding down the ON/OFF button when the machine is turned off.
    2. The Wi-Fi lamp starts flashing and the Status lamp lights orange.
    3. Press the Cut button 4 times while continuing to hold down the ON/OFF button.
    All the network settings will be reset.

APIPA --- If you do not assign an IP address manually (using the BRAdmin software) or automatically (using a DHCP/BOOTP/RARP server), the Automatic Private IP Addressing (APIPA) protocol will automatically assign an IP address from the range 169.254.1.0 to169.254.254.255.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

QL-710W, QL-720NW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.