PT-P910BT
![FAQs & Troubleshooting FAQs & Troubleshooting](/g/b/shared/img/module/icon_question_33.png) |
FAQs & Troubleshooting |
How do I set a tape cassette?
Follow the instructions below:
-
Open the Cassette Cover.
![Open the cover Open the cover](/g/b/img/faqend/faqp00001408_006/eu_ot/en/2367972/insert_tapecassette_01.gif)
-
Confirm the edge of the tape is aligned with the Tape Exit Slot.
![Insert the cassette Insert the cassette](/g/b/img/faqend/faqp00001408_006/eu_ot/en/2367967/insert_tapecassette_03.gif)
-
Insert the Tape Cassette into the printer until it locks into place.
![Insert the cassette Insert the cassette](/g/b/img/faqend/faqp00001408_006/eu_ot/en/2367968/insert_tapecassette_04.gif)
-
After the tape passes under the Tape Guide, pull the edge to remove any slack in the tape.
![Pull the tape edge Pull the tape edge](/g/b/img/faqend/faqp00001408_006/eu_ot/en/2367969/insert_tapecassette_05.gif)
-
Make sure the tape is not caught in the unit when inserting or removing the Tape Cassette.
-
Close the Cassette Cover.
![Close the cover Close the cover](/g/b/img/faqend/faqp00001408_006/eu_ot/en/2367974/insert_tapecassette_06.gif)
Be careful not to pinch your fingers when closing the Cassette Cover. There is a risk of injury.
Do not leave any printed labels in the Tape Exit Slot. Doing so will cause label jams.
If your question was not answered, have you checked other FAQs?
Have you checked the manuals?
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.