PT-7600
![FAQs & Troubleshooting FAQs & Troubleshooting](/g/b/shared/img/module/icon_question_33.png) |
FAQs & Troubleshooting |
How do I make a label with a barcode?
Please follow the steps below:
-
Set bar code parameters
-
Press
, then
.
-
Press
or
until the parameter that you wish to change is displayed.
-
Press
or
until the desired setting is displayed.
-
Repeat the step "b" and the step "c" until all parameters are set as you wish.
-
Press
.
-
Enter the bar code data
-
Press
.
-
Type in the new bar code data or edit the old data.
-
Add the bar code to the text
-
Press
to add the bar code to the text.
The following bar code parameters are available:
Parameter |
Settings |
PROTOCOL |
CODE 39, I-2/5, EAN13, EAN8, UPC-A, UPC-E, CODABAR, EAN128, CODE128 |
WIDTH (bar width) |
SMALL, MEDIUM, LARGE |
UNDER# (numbers printed below bar code) |
ON, OFF |
CHECK DIGIT* |
OFF, ON |
*The CHECK DIGIT parameter is available only with the CODE 39, I-2/5 and CODABAR protocols.
If your question was not answered, have you checked other FAQs?
Have you checked the manuals?
If you need further assistance, please contact Brother customer service:
Related Models
PT-2470, PT-7500, PT-7600
Content Feedback
To help us improve our support, please provide your feedback below.