Model discontinued. This page is no longer updated.

PT-1080

FAQs & Troubleshooting

FAQs & Troubleshooting

How can I minimize the tape margin?

Follow the steps below:

  1. Press F.
  2. Continue pressing F or press Left or Right until "Margin" is displayed.
  3. Press Enter.
  4. Press Left or Right until "Narrow" is displayed.
  5. Press Enter to apply the setting.
  6. Press Print.
  7. Cut along the dots " : " with scissors so that the text is centered in the label.
    Sample

25 mm margin that is produced prior to every label cannot be eliminated due to the construction of the tape mechanism. However, when you print more than one label continuously, the subsequent labels can be printed without the excess tape.

The following methods are useful for reducing tape use:

  • Using the "Numbering function"
  • Setting the tape margin to "Chain Print" - please make sure that you feed the label after the last label is printed, otherwise a part of the text may be cut off.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

GL-200, PT-1005, PT-1010, PT-1080, PT-1090, PT-7100, PT-H75

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.