Model discontinued. This page is no longer updated.

PT-H300

FAQs & Troubleshooting

FAQs & Troubleshooting
  • Date: 31/05/2013
  • ID: faqp00000347_003

How do I adjust a label length?

You can adjust the length of the printed label in levels of -5 to +5.

Follow the steps below:

  1. Press the Menu key to display the setup menu, select "Adjustment" using the UP or Down arrow key, and then press the OK or Enter key.

  2. Select "Label Length" using  the UP or Down arrow key and set the value using the Left or Right arrow key.



  3. Press the OK or Enter key to apply the setting.
  • Press the Escape key to return to the previous step.
  • Press the Space key to set the value to default setting.
  • Approximately 1% of the total label length will be adjusted by 1 level.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

PT-H300

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit