SDX900

FAQs & Troubleshooting

FAQs & Troubleshooting

How to Activate an Accessory Kit* (Rhinestone, Emboss Kit, etc.) for the Cutting Machine.

  • *Optional accessory is sold separately.
  • For information about compatible accessory kits, refer to What accessory kits are available?.
    There are countries where some accessories have not been released. To purchase accessories or for details on using them, contact the retailer where the machine was purchased or the nearest authorized service center.

 

Some of the accessories must be activated before using the function with the activation code that is in the box. Follow the instruction below to activate each function before using the accessory kit.

 

 

The operation procedure differs depending on your computer.
Follow the instructions below.

 

 

 

  1. For CanvasWorkspace users:
    Startup CanvasWorkspace on your computer.
    If CanvasWorkspace is not installed on your computer, click here to download the application.

    For CanvasWorkspace (Web) or mobile device users:
    go to CanvasWorkspace (Web). <https://canvasworkspace.brother.com
     

    You must create a CanvasWorkspace login ID.
    If you don’t have an account, click Create New Account on the screen after installation, and follow the instructions on the screen to create it.




     

  2. For CanvasWorkspace users:
    Click [Account Settings] on the Help menu.
    image

    For CanvasWorkspace (Web) or mobile device users:
    Click imagein the upper-right corner of the screen.

    image




     
  3. Click the [Premium Function Activation] .

    image




     
  4. Check the activation code on the activation card that is in the box.




     
  5. Type in the activation code(A), and then click [Activate(B)] .

    image

    The uppercase letters “O” and “I” are not used in the activation code.





 

  1. Check the content on the activation confirmation screen and if there are no problems, click [Activate].

    For users except for Foil Transfer Starter Kit and Embossing Kit:
    The activation is complete.
    For details on how to use the kit, refer to the instruction manual for each accessory in the
    User's Guide for Optional accessories of the Manual section.

    For information on the Foil Transfer Starter Kit and Embossing Kit:
    Go to the next step to activate from the machine’s LCD touchscreen display.


     
  2. Touch image in the home screen of the cutting machine to display the setting screen.

    image



     
  3. Touch [Premium Functions] on the settings screen.

    image



     
  4. Select [ON] beside [Kit Activation] you want to activate.

    image
     


The activation is completed.
For details on how to use the kit, refer to the instruction manual for each accessory in the User's Guide for Optional accessories of the Manual section.


 

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

SDX CE, SDX1000, SDX1200, SDX1250, SDX135, SDX1350, SDX1500, SDX1550, SDX2200D, SDX2240D, SDX2250D, SDX900, SDX950, SDX950SK, SDXTL

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.