Innov-is V3 LE
 |
FAQs & Troubleshooting |
How to use the Multi-purpose Screwdriver.
Since the screwdriver can be changed to three different positions, it can be extremely useful for the various machine preparations.
Position “1”
You can install/remove the presser foot holder, needle clamp screw.
 |
 |
Position “2”
You can install/remove the needle plate.
Position “3”
The multi-purpose screwdriver can be positioned over the screw on the embroidery frame to tighten the screw after hooping the fabric or when removing the fabric.
When rotating the multi-purpose screwdriver, do not forcefully rotate it in the direction that it does not rotate; otherwise, it may break.
Related Models
Innov-is 1500D/1500, Innov-is 2200, Innov-is 4000D/4000, Innov-is 5000, Innov-is BP3600, Innov-is I, Innov-is Ie, Innov-is NV2600, Innov-is NV800E, Innov-is NV850E, Innov-is NV870SE, Innov-is V3, Innov-is V3 LE, Innov-is V3 SE, Innov-is V5, Innov-is V5 LE, Innov-is V7, Innov-is XE1, Innov-is XE2, Innov-is XJ1, Innov-is XV
