SDX1250

FAQs & Troubleshooting

FAQs & Troubleshooting

How do I Create the Cutting Data (Scan to Cut Data) ?

A printed pattern or image or an original hand-drawn illustration can be scanned, converted to cutting lines for cutting/drawing with this machine, then saved as data.

img

 

 


 ----- Procedure -----

  1. Scanning
  2. Creating Cutting Data
  3. Saving Data
  4. Recalling Cutting Data

 

 

This FAQ explains the procedure for converting illustrations drawn on paper into cut data and saving them.

 

img


----- Preparing the material -----

 

When using the “Scan to Cut Data” mode, use originals like those described below.
 

  • Patterns that are clearly drawn, with no gradation, fading or blurriness
  • Not using an extremely intricate design
     

image
 

 

 

 

----- 1. Scanning -----

 

  1. Touch image , select the scanning mode, and then touch the [OK] key.
    First, test with grayscale recognition mode. If the desired cutting data is not created, test with color recognition mode.
    image
    image

    (1) Grayscale recognition mode
    (2) Color recognition mode
    (3) Scanning area

     

     

    For details, refer to the Recognition Mode / Scanning area.



     

  2. Attach the original to the mat, and then load the mat into the feed slot.
    Lightly insert the mat into the feed slot, and press img in the operation panel.

     
     
  3. Press the [Start] button to start scanning.
    >> When scanning is finished, the scanned image appears in the screen.
     

     

----- 2. Creating Cutting Data -----

 

The procedure for creating cutting data differs depending on the mode (Grayscale recognition mode / Color recognition mode).
For details on the each setting in the image editing screen, refer to the Each setting in the image editing screen.
 

  image (1) Each setting in the image editing screen

 


Grayscale recognition mode

  1. Select the cutting line type (Outline detection / Region detection / Line detection) in the image editing screen.
    image

    (1) Outline detection

    (2) Region detection

    (3) Line detection
    (Grayscale recognition mode only)

     

     

     

     

    Lines thicker than 1.5 mm will not be detected as lines.


     
  2. Use the touch pen to touch image and drag it around the screen to trim the cutting lines.
    image

    (1) Image Detection Level

    (2) Ignore Object Size

    (3) Smoothing Setting

     

     

     

     

     

  3. Save data after cutting data is completed.
     


 

Color recognition mode

 

  1. In the image trim screen, use the touch pen to drag image to trim the image to the size to be imported.
    image

    Trimming the image to the desired size can reduce the amount of time required to convert it to cutting data.


     

  2. Touch the [OK] key to confirm the trimmed area.
    image
     


     

  3. Select the detection standard (Outline detection / Region detection) in the image editing screen.
    image

    (1) Outline detection
    (2) Region detection

    (3) Image Detection Level

    (4) Ignore Object Size

    (5) Smoothing Setting

     


     
     

----- 3. Saving Data -----

 

  1. Select the destination where the data will be saved.
    Select the desired location. For this example, select the machine.
    image

    (1) Machine
    (2) USB flash drive
    (3) CanvasWorkspace


      >> Touching a key starts saving the data. When the data has been saved, the following message appears.

     


    image

     
  2. Touch the [OK] key to finish saving the data.

     
  3. Press img in the operation panel to feed out the mat, and then peel off the original from the mat.
     
     

----- 4. Recalling Cutting Data -----
 

Saved cutting data can be recalled for cutting.

 

  1. Attach the material for cutting to the mat, and then load the mat.

     

     

  2. Recall the saved cutting data.

    image

    >> A preview of the pattern layout appears.

     

  3. Touch the desired destination, and then select the desired pattern.
    image
    img





     

Recognition mode / Scanning area

 

(1) Grayscale recognition mode
The cutting data is created after the illustration is converted to grayscale. Scanning in grayscale recognition mode is most appropriate for illustrations with clear outlines or distinct brightness differences.
Processing is faster with this mode compared with the color recognition mode.
If there are adjacent objects of the same color after an illustration has been converted to grayscale, select the color recognition mode.
 

 

 

(2) Color recognition mode
The cutting data is created without converting the illustration to grayscale. Creating data in this mode may take some time.
* The default color recognition setting is the grayscale recognition mode.
 

 


Examples of illustrations appropriate for recognition mode:

Examples Recommended recognition mode
Outlines that are clear image Grayscale recognition mode
image

- Distinct difference in brightness between
   background and illustration
- Different brightness of adjacent colors

image
Similar brightness of adjacent colors image Color recognition mode

The edges of adjacent colors with the same brightness, as shown below, cannot be detected. In this case, use the color recognition mode.
image

(1) “a” and “b” as well as “c” and “d” have the same brightness.


(3) Scanning area
The scanning size settings screen appears. The size of the scanning area can be selected. The available scanning area sizes differ depending on the model.
Depending on the machine model, the sizes of mats that can be used will differ. Check the [Maximum Scanning Area] under [Machine Information] in the settings screen.

 

 

Back to the steps
 

 

 

 

Each setting in the image editing screen


<Edit key>

image Outline detection

If you wish to cut/draw along the outline of an image, select this option to convert the outline of the image to a cutting line. This is useful for saving as data an illustration drawn for an appliqué.

image Region detection
Select this option to detect the colored portions of an image as regions and create a cutting line around each region. Cutouts can be created using thick hand-drawn lines, such as borderlines of images or text illustrations. This option allows you to use not only cut-out patterns but the material from which portions are cut out, such as lace.
image Line detection (Grayscale recognition mode only)
Select this option to detect the center of lines and convert them to a cutting line. This is useful for detecting patterns consisting of multiple pieces and creating cutting lines for each piece.
image Image Detection Level
If the cutting lines were not correctly detected, change the number of colors to be detected. If a color that appears as a single color is detected as separate colors, reduce the number of colors. If adjacent colors with a similar brightness are detected as a single color, increase the number of colors.
image Ignore Object Size
Small unnecessary patterns (dotted lines, etc.) can be excluded from cutting data.
image Smoothing Setting
Specify the level of smoothing applied to the image outline.


 


<Difference in cutting lines depending on detection standard : Grayscale recognition mode>

Example 1

  Outline detection Region detection Line detection

Original

imageimage

Cutting lines

img img img

Finished project after cutting

img img img

 

 

 

Example 2

  Outline detection Region detection Line detection

Original

image

Cutting lines

img img Does not apply since there are no outlines
for each color in the original.

Finished project after cutting

img image

                                            
 

 

 

  <Difference in cutting lines depending on detection standard : Color recognition mode>

  Outline detection Region detection
Original image
Cutting lines img img
 

Finished project after cutting

img  image



Back to the steps

 

 

 

How to delete the unwanted spots and lines of the scanned image

 

Small spots and unwanted lines created during scanning can be deleted after a scanned image is converted to cutting data.

image (1) unwanted spots and lines



 

  1. After recalling the cutting data into the mat layout screen,and then touch the [Edit] key.

     
  2. Touch  image  in the mat editing screen to select multiple patterns.
    If the pattern you don't want to delete is selected, touch its pattern again to clear the selection.

    image

     
  3. Touch image  for specifying an area to select the patterns.
    Specify the area of the unwanted spots, and then touch the [OK] key.
    image image image

     
  4. Touch image to delete all of the selected spots.

    image

▲ Top

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

SDX CE, SDX1000, SDX1200, SDX1250, SDX135, SDX1350, SDX1500, SDX1550, SDX2200D, SDX2240D, SDX2250D, SDX900, SDX950, SDX950SK, SDXTL

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.