SDX1200

FAQs & Troubleshooting

FAQs & Troubleshooting
  • Date: 05/10/2018
  • ID: faqh00000718_001

Care and Maintenance (Cleaning the Holder)


Cleaning the Holder

If material cuttings, lint or dust accumulate in the holder, it may not operate correctly.
Clean the holder after every use.
 
 
 
  1. Twist off the holder cap to remove it.

    image



     
  2. Using a commercially available brush, clean off cuttings, lint and dust.
    Specifically clean off lint and dust around the blade. If lint and dust accumulate between the blade and holder, the blade may no longer rotate or the cutting quality may become poor. In addition, clean out any lint and dust that has accumulated in the cap.
    image


 

  1. Twist on the holder cap to attach it to the holder. Fully tighten the cap until it can no longer be turned.

    image
     

 

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

SDX CE, SDX1000, SDX1200, SDX1250, SDX135, SDX1350, SDX1500, SDX1550, SDX2200D, SDX2240D, SDX2250D, SDX900, SDX950, SDX950SK, SDXTL

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit