FS70WT
 |
FAQs & Troubleshooting |
An "E1" message appears on the panel.
The foot controller was pressed (or the start/stop button was pressed if the foot controller is not connected) and the reverse/reinforcement stitch button was pressed while the presser foot is raised.
Lower the presser foot lever before continuing the operation.
Each time a key pressed or an incorrect operation is performed, a beep is sounded.
- For a correct operation
One beep is sounded. - If an incorrect operation is performed
Two or four beeps are sounded. - If the machine locks up, for example, because the thread is tangled
The sewing machine continues to beep for four seconds.
The machine automatically stops.
Be sure to check for the cause of the error, and correct it before continuing to sew.
Related Models
AS-40, BC-2100/2300, BC-2500, comfort 40E, comfort 60E, CS10, CS120WT, CS-6000/6000t, CS70, CS-80, CS-8060, CX70PE, DS-120, DS120s, DS-140, DS-160, ES-2000, ES-2020, ES-2220, ES-2420, FS100WT, FS130QC, FS140, FS180QC, FS-20, FS200CE, FS210, FS250FE, FS250ME, FS-40, FS-40WT, FS60, FS60s, FS70WT, FS70WTs, Innov-is 150SE/ 150, Innov-is 20/20LE, Innov-is 200, innov-is 25, Innov-is 250, Innov-is 27SE, Innov-is 30, Innov-is 300, Innov-is 35, JK4000, JK7000, JS100, JS-40E, JS-50CE, JS-50E, JS-60E, JS-70E, KD40, KE20, ML-750, ModerN 210e, ModerN 40e, ModerN 50e, ModerN 60e, MS-4, MS40, MS-5, MS50, MS-6, MS60, NX-200, RS-240/250/260, SM-340E, SM-360E, Style 100Q, Style 80e, Style-40e, Style-50e, Style-60e, XR-6600
