Innov-is I
 |
FAQs & Troubleshooting |
Why is the outline sewing off the pattern?
This happens mainly when the fabric is not set to the embroidery frame correctly or the upper thread is too tight.
-
Improper backing material (stabilizer) is put on the fabric.
Thick stabilizer has to be used for elastic or thin fabric.
One Point Advice Fabrics and stabilizer material for embroidery
-
The fabric has to be set to the frame tight enough.
One Point Advice Embroidery
-
Decrease the upper thread tension manually to the basic thread tension setting or less.
If your question was not answered, have you checked other FAQs?
Have you checked the manuals?
If you need further assistance, please contact Brother customer service:
Related Models
Innov-is 1200, Innov-is 1250, Innov-is 1500D/1500, Innov-is 2200, Innov-is 4000D/4000, Innov-is 5000, Innov-is 500D, Innov-is 700E, Innov-is 700EII, Innov-is 750E, Innov-is 770E, Innov-is 900, Innov-is 90E, Innov-is 950, Innov-is 955, Innov-is 97E, Innov-is I, Innov-is Ie, Innov-is V3, Innov-is V3 LE, Innov-is V3 SE, Innov-is V5, Innov-is V5 LE, Innov-is V7, PE-150V, PE-180D, PE-190D, PE-300S, PE-400D, SuperGalaxie 3000/3000C/3000D/3100D
Content Feedback
To help us improve our support, please provide your feedback below.
