DCP-J1200W(E)
|
FAQs & Troubleshooting |
LED Patterns and Indications
The LEDs on your machine's control panel light up or blink to indicate machine status.
LED |
Description |
|
The LED is off. |
|
The LED is lit. |
|
The LED is blinking. |
|
The LED is blinking slowly and faintly. |
LED |
Status |
Description |
(Lit) |
Standby |
The machine is ready to print. |
(Blinking) |
Busy |
The machine is processing a print job. |
Warming Up (Low Temperature) |
The machine is warming up. |
Cooling Down (High Temperature) |
The machine is cooling down. |
Data Remaining |
There is print data in the machine's memory. To cancel the job and clear it from machine memory, press (STOP). |
(Blinking alternately) |
Job Cancelled |
The machine is cancelling the print job. |
(Blinking slowly and faintly) |
Sleep |
In Sleep mode (Power Save mode), the machine acts as if it is turned off, but it can still receive data.
When you send a print job, the machine wakes up. |
|
|
|
|
If your question was not answered, have you checked other FAQs?
Have you checked the manuals?
If you need further assistance, please contact Brother customer service:
Related Models
DCP-J1200W(E)
Content Feedback
To help us improve our support, please provide your feedback below.