HL-L6450DW

FAQs & Troubleshooting

Print by Raspbian light (Linux)

Printing

Use the following command:

lpr -P BrGenPrintML2 print_file_name

To change the print settings, use the "-o" switch:

lpr -P BrGenPrintML2 -o PageSize=A5 -o Resolution=300dpi print_file_name

You can view the details of Parameter by the following command.
Command: brprintconf_{Model Name without "-"}
E.g. MFC-J430W : brprintconf_mfcj430w

If the print jobs are not printed successfully, make sure you have correctly configured the printer's IP address or node name using the lpadmin command.

Supported File Formats

We recommend using the lpr command only when printing the following formats: PDF, PS, TXT, and JPG. To print other file formats, print directly from the application supporting that file format.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

Go to the Manuals section

If you need further assistance, please contact Brother customer service:

Go to the Contact Us section

Related Models

DCP-L2500D, DCP-L2500DR, DCP-L2520DW, DCP-L2520DWR, DCP-L2540DN, DCP-L2540DNR, DCP-L2560DW, DCP-L2560DWR, DCP-L5500DN, DCP-L6600DW, HL-L2300D, HL-L2300DR, HL-L2340DW, HL-L2340DWR, HL-L2360DN, HL-L2360DNR, HL-L2365DW, HL-L2365DWR, HL-L5000D, HL-L5100DN(T), HL-L5200DW(T), HL-L6250DN, HL-L6300DW(T), HL-L6400DW(T), HL-L6450DW , HL-S7000DN, MFC-L2700DN, MFC-L2700DNR, MFC-L2700DW, MFC-L2700DWR, MFC-L2720DW, MFC-L2720DWR, MFC-L2740DW, MFC-L2740DWR, MFC-L5700DN, MFC-L5750DW, MFC-L6800DW(T), MFC-L6900DW(T), MFC-L6950DW, MFC-L6970DW

Content Feedback

To help us improve our support, please provide your feedback below.