MFC-L2752DW
 |
FAQs & Troubleshooting |
Print a Transmission Verification Report
You can use the Transmission Verification Report as proof that you sent a fax. This report lists the receiving party's name or fax number, the time and date of transmission, duration of transmission, number of pages sent, and whether or not the transmission was successful.
There are several settings available for the Transmission Verification Report:
| On | Prints a report after every fax you send. |
| On (+Image) | Prints a report after every fax you send. A portion of the fax’s first page appears on the report. |
| Error only | Prints a report if your fax is unsuccessful due to a transmission error. Error only is the factory setting. |
| Error only (+Image) | Prints a report if your fax is unsuccessful due to a transmission error. A portion of the fax’s first page appears on the report. |
| Off | Your Brother machine does not print any reports after sending faxes. |
MFC-L2710DN/MFC-L2710DW
- Press Menu.
- Press
or 
to display the [Fax] option, and then press OK. - Press or to display the [Report Setting] option, and then press OK.
- Press or to display the [XMIT Verify] option, and then press OK.
- Press or to display the [Error Only], [ErrorOnly+Image], [Off], [On (+Image)], or [On (+Image)] option, and press OK.
- Press Stop/Exit.
MFC-L2730DW/MFC-L2750DW
- Press
. - Press or to select the option you want. If you select [On+Image] or [Error only (+Image)], the image will not appear on the Transmission Verification Report if Real Time Transmission is set to [On].
- Press
. If the transmission is successful, OK appears next to RESULT on the Transmission Verification Report. If the transmission is not successful, NG appears next to RESULT.
Content Feedback
To help us improve our support, please provide your feedback below.
