HL-J6100DW

FAQs & Troubleshooting

FAQs & Troubleshooting
  • Date: 03/12/2018
  • ID: faq00100219_511

Configure Active Directory® Authentication Using Web Based Management

Active Directory® authentication supports Kerberos authentication and NTLMv2 authentication. You must configure the SNTP protocol (network time server) and DNS server configuration for authentication.

  1. Start your web browser.
  2. Type "https://machine's IP address" in your browser's address bar (where "machine's IP address" is the machine's IP address).

    For example:

    https://192.168.1.2

  3. If the machine prompts you for a password, type it, and then click .
  4. Click the Administrator tab.
  5. Click the User Restriction Function menu in the left navigation bar.
  6. Select Active Directory Authentication.
  7. Click Submit.
  8. Select the Active Directory Authentication menu in the left navigation bar.
  9. Configure the following settings:
    Option
    Description
    Remember User ID
    Select this option to save your User ID.
    Active Directory Server Address
    Type the IP address or the server name (for example: ad.example.com) of the Active Directory® Server.
    Active Directory Domain Name
    Type the Active Directory® domain name.
    Protocol & Authentication Method
    Select the protocol and authentication method.
    LDAP Server Port
    Type the port number to connect the Active Directory® server via LDAP (available only for LDAP + kerberos authentication method).
  10. Click Submit.

Related FAQs

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

HL-J6000DW, HL-J6100DW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit