HL-L9310CDW(T)

FAQs & Troubleshooting

FAQs & Troubleshooting

Configure Active Directory® Authentication Using Web Based Management

Active Directory® authentication supports Kerberos authentication and NTLMv2 authentication. You must configure the SNTP protocol (network time server) and DNS server configuration for authentication.

  1. Start your web browser.
  2. Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the machine's IP address).
    For example:
    http://192.168.1.2
  3. Type a password if you have set one, and then click Right Arrow.
  4. Click the Administrator tab.
  5. Click the User Restriction Function menu in the left navigation bar.
  6. Select Active Directory Authentication.
  7. Click Submit.
  8. Select Active Directory Authentication in the left navigation bar.
  9. Configure the following settings:
    Option Description
    Storage PC Print Data Select this option to store incoming print data. After you log on to the machine, your PC print jobs will be printed automatically. This feature is available only for print data created by a Brother native printer driver.
    Remember User ID Select this option to save your User ID.
    Active Directory Server Address Type the IP address or the server name (for example: ad.example.com) of the Active Directory® Server.
    Active Directory Domain Name Type the Active Directory® domain name.
    Protocol & Authentication Method Select the protocol and authentication method.
    LDAP Server Port Type the port number to connect the Active Directory® server via LDAP (available only for LDAP + kerberos authentication method).

     

  10. Click Submit.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

HL-L8360CDW, HL-L9310CDW(T)

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.