HL-L6250DN

FAQs & Troubleshooting

FAQs & Troubleshooting

Configure Secure Function Lock 3.0 Using Web Based Management

  1. Start your web browser.
  2. Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the machine's IP address).

    For example:

    http://192.168.1.2

  3. Click the Administrator tab.
  4. Click the User Restriction Function menu in the left navigation bar.
  5. Select Secure Function Lock.
  6. Click Submit.
  7. Click the Restricted Functions menu in the left navigation bar.
  8. In the User List / Restricted Functions field, type a group name or user name (alphanumeric, up to 15 digits).
  9. In the Print and the other columns, select a check box to allow or clear a check box to restrict the function listed.
  10. To configure the maximum page count, select the On check box in the Page Limits column, and then type the maximum number in the Max. Pages field.
  11. Click Submit.
  12. Click the User List menu in the left navigation bar.
  13. In the User List field, type the user name.
  14. In the PIN Number field, type a four-digit password.
  15. To register the user's Card ID, type the card number in the Card ID (NFC ID) field (Available only for certain models).
  16. Click the Output drop-down list, and then select the output tray for each user (Available only for certain models).
  17. Select User List / Restricted Functions from the drop-down list for each user.
  18. Click Submit.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

HL-L5100DN(T), HL-L5200DW(T), HL-L6250DN, HL-L6300DW(T), HL-L6400DW(T), HL-L6450DW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.