HL-L2310D

FAQs & Troubleshooting

FAQs & Troubleshooting
  • Date: 30/11/2017
  • ID: faq00100214_007

Reset the Drum Counter

When you replace the drum unit with a new one, you must reset the drum counter by completing the following steps:

DO NOT reset the drum counter unless you are replacing the drum unit.

  1. Make sure the machine is turned on.
  2. Make sure that the front cover is open.
  3. Press and hold Go for about four seconds until all of the LEDs light up. When all four LEDs are lit, release Go.
  4. Close the front cover.
  5. Make sure the Drum LED is now off

Related FAQs

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

HL-L2310D, HL-L2312D

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit