ADS-1200

FAQs & Troubleshooting

FAQs & Troubleshooting
  • Date: 13/03/2023
  • ID: faq00002892_501

Replace the Pick Up Roller

Your machine is equipped with a scan counter that automatically counts how many times the machine has scanned. After approximately 100,000 scans, you may have to replace the Pick Up Roller.

  1. Open the Top Cover (1) and the Front Cover (2).
  2. Pinch the Pick Up Roller Cover (1) and then pull the cover up and remove.
  3. Slide the Pick Up Roller(1) to the right edge.
  4. Pinch and pull the Pick Up Roller out of the machine.
  5. Place a new Pick Up Roller into the machine.
    Confirm the left and right sides of the Pick Up Roller before attaching it.
  6. Slide the Pick Up Roller(1) to the left edge while turning the Pick Up Roller.
  7. Close the Pick Up Roller Cover.
  8. Close the Front Cover.
  9. Reset the Pick Up Roller Counter. See Related Information:Reset the Usage Counters.
Confirm the following:
  • The Pick Up Roller Count value is 0.

Related FAQs

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

ADS-1200, ADS-1700W

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit