MFC-7460DN

FAQs & Troubleshooting

FAQs & Troubleshooting

Scan a document and open the scanned image with a graphics application (For Macintosh)

You can scan a document directly into your graphics application for viewing and editing using ControlCenter2.

NOTE: Illustrations shown below are from a representative product and operating system and may differ from your Brother machine and operating system.
 

  1. Load your document.
  2. Click the Scan tab. If you want to change the scan settings, click here to see the details of how to change scan settings.
  3. Click Image. The image data will appear in the pre-selected application you have selected in the settings window for Scan to Image.
    If the Scan to Image dialog box appear, click Start Scanning. Your default application will start and display the image.

    Click Image

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

DCP-7055, DCP-7055R, DCP-7055W, DCP-7055WR, DCP-7057, DCP-7057R, DCP-7057WR, DCP-7060D, DCP-7060DR, DCP-7065DN, DCP-7065DNR, DCP-7070DW, DCP-7070DWR, DCP-9055CDN, DCP-9270CDN, DCP-J140W, DCP-J525W, DCP-J725DW, DCP-J925DW, MFC-7360N, MFC-7360NR, MFC-7460DN, MFC-7860DW, MFC-7860DWR, MFC-9460CDN, MFC-9465CDN, MFC-9970CDW, MFC-J430W, MFC-J5910DW, MFC-J625DW, MFC-J6510DW, MFC-J6710DW, MFC-J6910DW, MFC-J825DW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.