MFC-9342CDW

FAQs & Troubleshooting

FAQs & Troubleshooting

Out of Memory

There are some cases when the machine's display shows the message Out of Memory. Follow the solution suitable for your case.


NOTE: Available functions differ depending on the models.


  • Case 1: If a secure print operation (printing the secure data) is in process:
    Press Cancel(Cancel) and delete the previously stored secure print data.

  • Case 2: If a print operation is in process:
    Do one of the following:
    • Reduce the print resolution.
    • Clear the faxes from the memory. Print the faxes that are stored in the memory to restore the memory to 100%. Then turn off Fax Storage to avoid storing more faxes in the memory.

  • Case 3: If a fax sending or copy operation is in progress:
    Do one of the following:
    • Press Send Now, Partial Print or Quit to send or copy the scanned pages.
    • Press Cancel(Cancel) and wait until the other operations in progress finish, and then try again.
    • Clear the faxes from the memory. Print the faxes that are stored in the memory to restore the memory to 100%. Then turn off Fax Storage to avoid storing more faxes in the memory.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

DCP-9015CDW, DCP-9017CDW, DCP-9020CDW, DCP-9022CDW, MFC-9140CDN, MFC-9142CDN, MFC-9330CDW, MFC-9332CDW, MFC-9340CDW, MFC-9342CDW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.