DCP-7060D

FAQs & Troubleshooting

FAQs & Troubleshooting
  • Date: 04/02/2011
  • ID: faq00000310_009

JAM DUPLEX

Please follow the steps below to solve the problem:

 

NOTE: Illustrations shown below are from representative product and may differ from your Brother machine.

 

  1. Leave the machine turned on for 10 minutes to cool down.

    After you have just used the machine, some internal parts of the machine will be extremely hot. When you open the front or back cover (back output tray) of the machine, DO NOT touch the shaded parts shown in the illustration. If you do this, you may burn yourself.
    DO NOT touch


  2. Pull the duplex tray completely out of the machine.
    The duplex tray
  3. Pull the jammed paper out of the machine or the duplex tray.
    Pull the jammed paper
  4. Make sure that the jammed paper does not remain under the machine from static electricity.

    Under the machine

  5. Put the duplex tray back in the machine.

Related FAQs

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

DCP-7060D, DCP-7060DR, DCP-7065DN, DCP-7065DNR, DCP-7070DW, DCP-7070DWR, MFC-7460DN, MFC-7860DW, MFC-7860DWR

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit