DCP-T310
 |
FAQs & Troubleshooting |
Set the Date and Time
(MFC models)
The LCD displays the date and time. If they are not current, re-enter them. You can add the date and time to each fax you send by setting your Station ID.
(DCP models)
If the machine's power has been off, the machine's date and time may not be current. Re-enter them.
DCP-T310/DCP-T510W/DCP-T710W
- Press Menu.
- Press
or 
to select the following: - Select [Initial Setup]. Press OK.
- Select [Date&Time]. Press OK.
- Select [Date&Time]. Press OK.
- Enter the digits for the date in one of the following ways:
- Press or on the control panel to set the last two digits of the year. Press OK. Repeat these steps for setting the month and day.
- Enter the last two digits of the year using the dial pad, and then press OK. Repeat these steps for setting the month and day.
- Enter the digits for the time in one of the following ways:
- Press or on the control panel to set the hour. Press OK. Repeat these steps for setting the minute.
- Press Stop/Exit.
MFC-T910DW
- Press Settings.
- Press or to select the following:
- Select [Initial Setup]. Press OK.
- Select [Date & Time]. Press OK.
- Select [Date]. Press OK.
- Enter the last two digits of the year using the dial pad, and then press OK.
- Enter the two digits for the month using the dial pad, and then press OK.
- Enter the two digits for the day using the dial pad, and then press OK.
- Press or to select [Time], and then press OK.
- Enter the time (in 24-hour format) using the dial pad, and then press OK.
- Press Stop/Exit.
Content Feedback
To help us improve our support, please provide your feedback below.
