Clean the scanner to improve the copy or fax quality
Follow steps below:
NOTE: Illustrations shown below are from a representative product and may differ from your Brother machine.
Press and hold down to turn off the machine.
(For MFC-9340CDW)
Unfold the ADF document support (1) and then open the ADF cover (2).
Clean the white bar (3) and the scanner glass strip (4) underneath it with a soft lint-free cloth moistened with water.
Close the ADF cover (2) and fold the ADF document support (1).
Lift the document cover (1).
Clean the white plastic surface (2) and scanner glass (3) underneath it with a soft lint-free cloth moistened with water.
For the models with an ADF (Automatic Document Feeder):
In the ADF unit, clean the white bar (1) and the scanner glass strip (2) underneath it with a soft lint-free cloth moistened with water.
In addition to cleaning the scanner glass and glass strip with a soft lint-free cloth moistened with water, run your finger tip over the glass to see if you can feel anything on it. If you feel dirt or debris, clean the glass again concentrating on that area. You may have to repeat the cleaning process three or four times. To test, make a copy after each cleaning.
Close the document cover.
Press to turn on the machine.
If your question was not answered, have you checked other FAQs?
to turn off the machine.
to turn on the machine.
