HL-3152CDW

FAQs & Troubleshooting

FAQs & Troubleshooting
  • Date: 26/06/2020
  • ID: faq00000110_024

Adjust the Brother machine's Sleep Time setting

The Sleep Time setting can reduce power consumption. When the machine is in the Sleep mode (Power Save mode) it acts as though it were turned off. The machine will wake up and start printing when it receives a print job.

You can choose how long the machine must be idle before it goes into the Sleep mode. When the machine receives a print file or document, the timer will be reset.

While the machine is in the Sleep mode the LCD will show Sleep.

For Wireless Models

 If you cannot print or scan wirelessly, make sure both your Brother machine and your wireless router/access point use the latest firmware.If you cannot print or scan wirelessly, make sure both your Brother machine and your wireless router/access point use the latest firmware.

Follow the steps below to adjust the Brother Machine's Sleep Time setting.

 

  1. Press the Up or Down arrow key to choose General Setup. Press OK.
     
  2. Press the Up or Down arrow key to choose Ecology. Press OK.
     
  3. Press the Up or Down arrow key to choose Sleep Time. Press OK.
     
  4. Choose the length of time the machine is idle before entering the Sleep mode. Press OK.
     
  5. Press Cancel to return to Ready mode.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

HL-3140CW, HL-3142CW, HL-3150CDW, HL-3152CDW, HL-3170CDW, HL-3172CDW, HL-5470DW, HL-6180DW, HL-6180DWT, HL-S7000DN

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit