MFC-L3730CDN

FAQs & Troubleshooting

FAQs & Troubleshooting

Print the Network Configuration Report

The Network Configuration Report lists the network configuration, including the network print server settings.
  • Node Name: The Node Name appears on the current Network Configuration Report. The default Node Name is "BRNxxxxxxxxxxxx" for a wired network or "BRWxxxxxxxxxxxx" for a wireless network (where "xxxxxxxxxxxx" is your machine's MAC Address / Ethernet Address.)
  • If the [IP Address] on the Network Configuration Report shows 0.0.0.0, wait for one minute and try printing it again.
  • You can find your machine's settings, such as the IP address, subnet mask, node name, and MAC Address on the report, for example:
    • IP address: 192.168.0.5
    • Subnet mask: 255.255.255.0
    • Node name: BRN000ca0000499
    • MAC Address: 00-0c-a0-00-04-99

DCP-L3510CDW/DCP-L3517CDW

  1. Press Menu.
  2. Press or to display the [Print Reports] option, and then press OK.
  3. Press or to select the [Network Config] option, and then press OK.
  4. Press Mono Start or Colour Start.

DCP-L3550CDW/MFC-L3710CW/MFC-L3730CDN/MFC-L3750CDW/MFC-L3770CDW

  1. Press [Settings]>[All Settings]>[Print Reports]>[Network Configuration].
  2. Press [Yes].
  3. Press .

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

DCP-L3510CDW, DCP-L3517CDW, DCP-L3550CDW, MFC-L3710CW, MFC-L3730CDN, MFC-L3750CDW, MFC-L3770CDW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.