• Due to the construction of the tape mechanism, there is no way to print without excess tape before the first label.　However, when you print more than one label continuously, the subsequent labels can be printed without the excess tape.
• The margin length depends on "Margin Options" setting. Select the [Chain Print] or [Small] option for smaller margins.

Chain Print

1. Press [Menu] key. 
2. Press  or  to display the [Margin], and then press [Enter] key. ( / )
3. Press  or  to select the [Chain Print], and then press [Enter] key. ( / )
4. Enter the text.
5. Press [Print] key  , [Copies] appears.
6. Press   or   to select your desired number of copies, and then press [Print] key  . 
7. When the message [Feed OK] appears after the last label is printed, be sure to press [Enter] key. ( / )

   When [Chain Print] is set, feed the tape before using the cutter otherwise a part of the text may be cut off.

   Be sure to feed the tape before cutting the tape.

8. After the tape is fed, press the cutter lever to cut it off.

<Print result>

Small

1. Press [Menu] key. 
2. Press  or  to display the [Margin], and then press [Enter] key. ( / )
3. Press  or  to select the [Chain Print], and then press [Enter] key. ( / )
4. Enter the text.
5. Press [Print] key  , [Copies] appears.
6. Press   or   to select your desired number of copies, and then press [Print] key . 
7. After the tape is fed, press the cutter lever to cut it off. Cut along the dots " : " with scissors so that the text is centered in the label.

<Print result>

• When the label length is approximately 26 mm (1.0") or more
  
• When the label length is approximately 26mm (1.0") or less
  
  If printing a single label:
  
  
  If printing multiple labels: